Stop Overpaying for Electricity. Power Your Home with Free Solar Energy
Complete solar system kits from 1kVA to 20kVA — panels, inverter, battery & installation included. Sized to your appliances. Installed across all 47 counties.
Choose Your Solar System Size
Every kit includes panels, inverter, battery, accessories & professional installation. All components voltage-matched and guaranteed compatible.
🧮 Not Sure Which Size? Use Our Free Solar Calculator
Select your appliances → get your exact kVA system size + price in 60 seconds.
Browse Our Best-Selling Products
Individual solar panels, inverters, batteries & accessories. All voltage-matched and available for delivery across Kenya.
150W Solar Street Light
Wattage: 150W integrated all-in-one solar street light — entry-level pricing for first-time solar buyers LED Configuration: 3 LED pods (~80 SMD chips total), 6000K cool white daylight Solar Panel: 18W monocrystalline (12V), top-mounted with 180° adjustable angle Battery: LiFePO4 lithium iron phosphate — 3.2V 22Ah (correctly sized for 150W output), 2000+ cycles Luminous Output: 15,000 lumens at full brightness Charging Time: 6–8 hours of typical Kenyan sunshine Working Time: Up to 12 hours (lab spec) / 9–11 hours (real-world Kenyan conditions) Operating Modes: Smart 4-mode controller — auto dusk/dawn, motion sensor, timer, manual remote Detection Range: 6 metres motion sensor radius, 180° detection arc Sensor Technology: PIR motion + ambient light photocell Ingress Protection: IP66 — dust-tight and rain-resistant Operating Temperature: -20°C to +60°C Installation Height: Recommended 4–6 metres on pole or wall bracket Coverage Area: Effectively illuminates 80–120 square metres at recommended mounting height Mounting: Universal bracket — fits poles 50–80mm diameter or wall-mount with anchors Remote Control: Included — switch modes, set timer, manual on/off Warranty: 2-year manufacturer warranty Use Cases: Small residential gates, walkway lighting, single-vehicle driveways, garden paths, security lighting for single entry points, kiosk frontages, small market stalls, rural homestead front entries
250W Solar Street Light
Wattage: 250W integrated all-in-one solar street light — the practical mid-range option between basic 200W and full-commercial 300W LED Configuration: 5 high-output LED pods (~120 SMD chips total), 6000K cool white daylight Solar Panel: 28W monocrystalline (15V), top-mounted with 180° adjustable angle Battery: LiFePO4 lithium iron phosphate — 3.2V 36Ah, 2000+ deep cycles, 5+ year service life Luminous Output: 25,000+ lumens at full brightness Charging Time: 6–8 hours of Kenyan sunlight Working Time: Up to 13 hours (lab spec) / 10–12 hours (real-world Kenyan conditions) Operating Modes: Smart 4-mode controller — auto dusk/dawn, motion sensor, timer, manual remote Detection Range: 9 metres motion sensor radius, 180° detection arc Sensor Technology: PIR motion + ambient light photocell Ingress Protection: IP66 — fully dust-sealed, withstands heavy rain and high-pressure water spray Operating Temperature: -20°C to +60°C Installation Height: Recommended 5–8 metres on pole or wall bracket Coverage Area: Effectively illuminates 165–200 square metres at recommended mounting height Mounting: Universal bracket — fits poles 60–80mm diameter or wall-mount with anchors Remote Control: Included — switch modes, set timer, manual on/off Warranty: 2-year manufacturer warranty Use Cases: Large residential compounds, church courtyards, small school grounds, mid-size shop forecourts, livestock yards, guesthouse driveways, NGO compound perimeters
300W Solar Street Light
Wattage: 300W integrated all-in-one solar street light — engineered for commercial-scale outdoor coverage LED Configuration: 6 high-output LED pods (~180 SMD chips total), 6000K cool white daylight Solar Panel: 35W monocrystalline (18V), top-mounted with 180° adjustable angle Battery: LiFePO4 lithium iron phosphate — 3.2V 45Ah (properly sized for sustained 300W output), 2000+ deep cycles Luminous Output: 30,000+ lumens at full brightness Charging Time: 6–8 hours of Kenyan sunlight Working Time: Up to 15 hours (lab) / 10–12 hours typical Kenyan real-world dusk-to-dawn on a single day's charge Operating Modes: 4-mode controller — dusk/dawn auto / motion sensor / timer / manual Detection Range: 10 metres motion sensor radius, 180° detection arc Ingress Protection: IP66 — dust-tight, resistant to heavy rain and high-pressure water spray Operating Temperature: -20°C to +60°C Installation Height: Recommended 6–10 metres on pole or wall bracket Coverage Area: Effectively illuminates 180–250 square metres at recommended mounting height Mounting: Universal bracket — fits poles 60–80mm diameter or wall-mount with anchors Remote Control: Included — switch modes, set timer, manual on/off Warranty: 2-year manufacturer warranty Use Cases: Parking lots, commercial perimeters, factory yards, large schools, agribusiness compounds, church complexes, rural roads, town markets, petrol stations
200W Solar Street Light
Wattage: 200W integrated all-in-one solar street light — actual LED load optimised for 20,000+ lumens output LED Configuration: 360 high-brightness SMD chips, 6000K cool white daylight Solar Panel: 25W monocrystalline (12V), top-mounted with 180° adjustable angle Battery: LiFePO4 lithium iron phosphate — 3.2V 30Ah, 2000+ deep cycles, 5+ year life Charging Time: 6–8 hours of Kenyan sunlight (5.5 peak sun hours average) Working Time: 10–12 hours on full charge; auto-dims after motion detection inactivity Operating Modes: Dusk-to-dawn auto / Motion sensor (full brightness on motion, 30% standby) / Timer / Remote-controlled Detection Range: 8 metres motion sensor radius, 180° detection arc Ingress Protection: IP66 rated — fully sealed against dust, withstands heavy rain and coastal humidity Operating Temperature: -20°C to +60°C — handles every Kenyan climate from highlands to coast Installation Height: Recommended 4–8 metres on a pole or wall bracket Coverage Area: Effectively illuminates 100–150 square metres at recommended mounting height Mounting: Universal bracket — fits poles 60–80mm diameter or wall-mount with anchors Remote Control: Included — switch modes, set timer, manual on/off Warranty: 2-year manufacturer warranty against electronic failure Use Cases: Compounds, gates, driveways, parking lots, school grounds, church compounds, small shopping centres, rural homesteads, livestock sheds
40mm Solar End-Clamp
Purpose: Anchors the outer panels at the start and end of every row in commercial-grade solar arrays using 40mm panel frames Built For: Heavy-wattage panels (typically 600W+) deployed in commercial rooftops, ground-mount arrays, and industrial installations Material: 6005-T5 structural anodized aluminum body with SS304 stainless steel bolt, washer, and pre-fitted sliding rail nut Clamp Length: 40mm (L=40mm) Hardware Included: 1 × heavy-duty J-profile clamp body, 1 × DIN912 M8×30 bolt, 1 × M8 spring washer, 1 × Nut-2Module sliding rail nut Quantity Logic: 4 end-clamps per panel row (2 at each row end) regardless of panels per row Wind Load Rating: 60 m/s wind speed at correct rail spacing Tightening Torque: 18–22 Nm using a calibrated torque wrench with M8 hex socket Rail Compatibility: Fits all 38mm-channel aluminum rails (residential and heavy-duty commercial rail profiles) Tender-Ready: Supplied with material certificates and conformance documentation for commercial project submissions Service Life: 25+ years in Kenyan tropical operating conditions Warranty: 10-year structural warranty against material defects
35mm Solar End-Clamp
Purpose: Anchors the outermost panels in any solar row to the mounting rail, sized for 35mm panel frames Coverage: Suits the majority of solar panels installed across Kenya since 2015 — the dominant frame size for residential and small commercial systems Material: 6005-T5 anodized aluminum body with SS304 stainless steel bolt, washer, and integrated rail nut Clamp Length: 40mm (L=40mm) Hardware Included: 1 × J-profile end-clamp body, 1 × DIN912 M8×30 bolt (longer than 30mm version for thicker frame), 1 × M8 spring washer, 1 × Nut-2Module Quantity Logic: 4 end-clamps per row of panels — 2 at the starting edge, 2 at the terminating edge Wind Load Rating: Rated to 60 m/s wind speed under correct installation spacing Tightening Torque: 18–22 Nm with calibrated M8 hex socket Rail Compatibility: Fits all 38mm-channel aluminum mounting rails Repair-Friendly: Common stocked size — readily available for replacement on existing installations Service Life: 25+ years in Kenyan tropical operating conditions Warranty: 10-year structural warranty
33mm Solar End-Clamp
Purpose: Secures the outermost panels at the start and end of a row to the mounting rail, sized precisely for 33mm panel frames Why It Exists: The 33mm frame is the awkward in-between size — too tight for 35mm clamps, too loose for 30mm clamps; this is the precision-fit answer Material: 6005-T5 anodized aluminum body with SS304 stainless steel bolt, washer, and pre-fitted sliding rail nut Clamp Length: 40mm (L=40mm) Hardware Included: 1 × J-profile end-clamp body (33mm-specific aperture), 1 × DIN912 M8×22 bolt, 1 × M8 spring washer, 1 × Nut-2Module Quantity Logic: 4 end-clamps per panel row (2 at each end of the row) Wind Load Rating: Tested to 60 m/s wind speed Tightening Torque: 18–22 Nm with an M8 hex socket Rail Compatibility: Fits all standard 38mm-channel aluminum mounting rails Service Life: 25+ years in Kenyan operating conditions Warranty: 10-year structural warranty
30mm Solar End-Clamp
Purpose: Secures the outermost panels at the start and end of a solar panel row to the mounting rail Panel Frame Compatibility: Engineered for 30mm framed solar panels — the standard for modern N-type Tier-1 modules Material: 6005-T5 anodized aluminum body with SS304 stainless steel bolt, washer, and integrated rail nut Clamp Length: 40mm (L=40mm) Hardware Included: 1 × J-profile end-clamp body, 1 × DIN912 M8×22 bolt, 1 × M8 spring washer, 1 × Nut-2Module sliding rail nut Quantity Logic: Always 4 end-clamps per panel row (2 at row start, 2 at row end) regardless of how many panels are in the row Wind Load Rating: Tested to 60 m/s wind speed at correct installation spacing Tightening Torque: 18–22 Nm using an M8 hex socket Rail Compatibility: Fits all standard 38mm-channel aluminum mounting rails Application: Final-step component in any rail-based solar mounting installation Service Life: 25+ years in Kenyan tropical conditions Warranty: 10-year structural warranty
From Enquiry to Free Power in 4 Steps
Size Your System
Use our free calculator or WhatsApp us with your KPLC bill. We'll recommend the right kVA system.
Get a Quote
We send a detailed quote with components, pricing, and timeline within 24 hours.
We Install
Our certified technicians install your system in 1-3 days. Panels, wiring, testing — all handled.
Enjoy Free Power
Start saving money immediately. We provide after-sales support and maintenance guidance.
Why 120+ Kenyans Trust Us With Their Solar
Matched System Kits
Every kit has voltage-matched components — inverter, battery, and panels guaranteed compatible. No guesswork, no mismatched parts.
Transparent Pricing
No hidden costs. Our calculator shows you the full price including panels, inverter, battery, accessories, and installation labour.
Professional Installation
Certified technicians install your system properly. 1-year workmanship warranty. We serve all 47 counties across Kenya.
After-Sales Support
WhatsApp us anytime. We troubleshoot remotely, provide maintenance guidance, and honour all warranty claims promptly.
Negotiable Installation Cost
We believe every Kenyan deserves solar. Installation costs are always negotiable — talk to us and we'll work out a fair price.
Free Solar Calculator
Our online tool sizes your system based on your actual appliances. No salesperson pressure — get facts first, decide later.
What Our Customers Say
"I purchased solar panels and a backup system from Solar Energy Suppliers, and I couldn't be happier! The team was professional, knowledgeable, and handled the installation flawlessly. The system works perfectly."
"I bought a 5kVA solar backup system for my parents in Kenya while I was in Saudi Arabia. They made everything easy, from writing and signing the agreement to installing the system. My parents are very happy!"
"Our 10kVA solar system is working perfectly! The installation was smooth, and we're already saving on energy costs. Great job by the Solar Energy Suppliers team!"
Real Projects. Real Savings.
Every system below was designed, supplied, and installed by Bicity Solar. See the results, then let us do the same for you.
102.4kW Solar Water Pumping System — Jogoo Mutaita
📹 Watch Our Work in Action on ▶ YouTube
We Install Solar Across All 47 Counties
Frequently Asked Questions
How much does a solar system cost in Kenya?
What size solar system do I need for my house?
Do you install across Kenya or just Nairobi?
How long does installation take?
Is the installation cost negotiable?
What warranties do you provide?
Ready to Start Saving With Solar?
Join 120+ Kenyans who've already cut their electricity bills by up to 90%. Get started in 60 seconds.
What Our Customers Say on Google
Real reviews from real customers. These are pulled directly from our Google Business Profile and update automatically.
Happy with our service? Leave us a review on Google →
